MJ8-CAT6S surge protector for 10Gb Ethernet

Reference price :

Select a product to request a quote

MJ8-CAT6S surge protector for 10Gb Ethernet

Name: MJ8-CAT6S surge protector for 10Gb Ethernet
Brand: CITEL
SKU: MJ8-CAT6S
Availability: InStock
Rating: 5 (1 reviews)

Series

MJ8
Model

MJ8-CAT6S
Brand / Made in

CITEL / FRANCE

Cat.5,5E and Cat.6 Surge Protector
Hybrid GDT and Diode Technology
10/100/1000Mbps Compatible
Bi-Directional Protection
Shielded Connector Configurations
DIN Rail, Screw Lug, and Flange Mounting

MJ8-CAT6S Ethernet network surge protectors are designed for computer networks with very fast data transfer speeds up to 10 Gbit/s for the Category 6 networks with shielded cable (STP). Their GDT/Diodes circuit gives them the discharge capacity necessary for the protection of inter-building connections. In order to cover the many various types of networking applications.

* Currently, MJ8-CAT6S has been replaced by MJ8-C6A

Product specifications

Product specifications
product manual
Download file

ELECTRICAL PROPERTIES

Network: 10Gigabit Ethernet, Cat.6 cabling
Nominal line voltage Un: 5 Vdc
Max. DC operating voltage Uc: 8 Vdc
Max. load current IL: 1 A
Max. data rate: 10 Gbps
Max. frequency f max.: > 250 MHz
Insertion loss: < 1 dB
Protection level Up: 20 V
Max. shunt capacitance C: < 25 pF
Impulse current Iimp: 500 A
Line/Line Nominal discharge current In L/L: 500 A
Line/Ground Nominal discharge current In L/PE: 2000 A

MECHANICAL PROPERTIES

Technology: GDT+Clamping diode
SPD configuration: 4 pairs+shielded
Connection to Network: RJ45 shielded female input/output
Format: Connector RJ45
Mounting: Mounting flange,Screw lug, DIN Rail
Housing material: Aluminium
Operating temperature: -40/+85°C
Protection rating: IP20
Failsafe mode: Short-circuit
Disconnection indicator: Transmission interrupt
Pinout: (1-2)(3-6)(4-5)(7-8)
Dimensions: See diagram

NORMS

Standards compliance: IEC 61643-21 / EN 61643-21 / UL497 B / IEEE 802-3an

INSTALLATION
The surge protector for IT networks must be installed while respecting the following principles:

SPDs must be installed on the both sides of the transmission line (e.g. server side and terminal equipment side)
The surge protector and the protected equipment must be interconnected with the bonding network of the installation.
The earthing conductor (between the earth output of the SPD and the bonding circuit of the installation) must be as short as possible (less than 0.50 m).
The AC power supply of the equipment must also be surge protected.