ATLAN 1000BASE-T POE surge protector for PoE and 1Gb Ethernet

Reference price :

Select a product to request a quote

ATLAN 1000BASE-T POE surge protector for PoE and 1Gb Ethernet

Name: ATLAN 1000BASE-T POE surge protector for PoE and 1Gb Ethernet
Brand: AT
SKU: ATLAN 1000BASE-T POE (AT-2204)
Availability: InStock
Rating: 5 (1 reviews)

Series

ATLAN
Model

ATLAN 1000BASE-T POE (AT-2204)
Brand / Made in

AT / FRANCE

Maximum transfer speed: 1000 Mbit/s
Nominal voltage (Un): 48 VDC
Nominal discharge current per line C2 (In (C2)): 2 kA
Type of connection: Series (two ports)
Nr. of pairs protected: 1 x 4 pairs
Certificated tests according to: UNE-EN IEC 61643-21

ATLAN 1000 BASE-T POE - Surge protector for POE computer networks in a metallic enclosure. 1 GBit/s. Protects power supply (48V) and data pairs. RJ45 input/output. Up = 200V. Includes RJ45 cable, 0,5 m long.

ATLAN protectors are especially designed to prevent failures in data transfer between equipment within the same network. They protect the electronic circuit inputs of the network cards against damage due to transient currents.

ATLAN is a protector with RJ45 input and output, able to withstand current up to 2 kA per line. It is designed to individually protect every individual piece of equipment connected to the computer network. It is suitable for equipment which transmits a large amount of data (workstations, graphic stations, servers etc.) Includes 50 cm cable with RJ45 connector.

ATLAN series protectors ave been tested in official and independent laboratories, obtaining their characteristics according to relevant standards.

Product specifications

Product specifications
product manual
Download file

DATASHEET

Reference: AT-2204
Maximum transfer speed: 1000 Mbit/s
Nominal voltage (Un): 48 VDC
Maximum continuous operating voltage (Uc): 60 VDC
Nominal discharge current per line C2 (In (C2)): 2 kA
Protection level at In(8/20 µs wave) (Up(In)): 200 V
Maximum operating current (IL): 300 mA
Series resistance (Rs): 15 Ω
Response time (tr): < 10 ns
Working temperature: -40 °C to +70 °C
Protector location: Indoor
Type of connection: Series (two ports)
Nr. of pairs protected: 4 pairs
Dimensions: 68 x 47 x 30 mm
Enclosure material: Aluminium
Enclosure protection: IP20
Input / output connector: RJ45 / RJ45 shielded
Earthing system: 6 mm faston

TESTS AND CERTIFICATIONS

Certificated tests according to: UNE-EN IEC 61643-21
Relevant standards: UNE 21186, NF C 17-102, IEC 62305
Products compliant with EC requirements

INSTALLATION
The surge protector for IT networks must be installed while respecting the following principles:

SPDs must be installed on the both sides of the transmission line (e.g. server side and terminal equipment side)
The surge protector and the protected equipment must be interconnected with the bonding network of the installation.
The earthing conductor (between the earth output of the SPD and the bonding circuit of the installation) must be as short as possible (less than 0.50 m).
The AC power supply of the equipment must also be surge protected.