Traffic control, or Intelligent Transportation Systems (ITS) equipment, employ sensitive technology that must be protected from destructive overvoltages.
Since decades, CITEL has manufactured a complete line of Surge Protective Devices (SPD’s) to protect vulnerable equipment from the harmful effects of lightning strikes and other line disturbances. CITEL is a world leader in surge protection solutions and provides a wide range of specialized protective products and components specifically engineered for transportation applications.
Surge Protective Devices are specifically engineered to protect ITS systems from these harmful surges so that the system can continue to operate, even after lightning surges. The SPD’s are designed to react to any overvoltage that is experienced in the system, such as one that would be caused by lightning or switching events. The instant a surge is detected, the SPD is activated and goes to work. By catching, absorbing and safely redirecting the electrical surge, a SPD prevents damage or destruction of your equipment. In addition the SPD stops the surge from propagating throughout the system.
SPD’s make it possible to easily prevent surges from destroying your ITS equipment. By conducting a risk analysis on your specific ITS system, you can determine the level of protection needed in order to maintain optimal, safe functionality and to prevent costly repairs or equipment replacement. Performing a risk analysis is based on factors such as the size of installation, location, the configuration of your ITS system and can be quickly done by a surge expert. It’s a small step that can have a big impact on the overall effectiveness of your ITS system !
Complete range of SPDs for every type of AC network. This wide range is splitted in Types following IEC standards: Type 1 for high exposure areas, Type 2 for regular exposure and Type 3 for terminal protection. Most of AC power SPDs are using pluggable feature in order to ease the maintenance operations. VG technology (Patented) versions are also available and will bring better efficiency and reliability.
CITEL offers a wide range of SPDs dedicated for HF coaxial lines. To protect equiment connected to radio systems and video coaxial cables. Available in the main coaxial connector versions, they are designed to to be in series with the lines and connected the earthing network. Bandwidth up to 6 GHz.
Dataline interfaces are especially sensitive to surges. SPDs on datalines are highly recommanded to bring the highest safety level for intelligent transportation systems. CITEL range can answer to all the dataline and signal networks. SPD available for DIN rail mounting, with pluggable feature or very small dimensions in case of numerous I/O to protect.
As AC power network, DC power networks could be disturbed by surge voltages. CITEL offers a range of SPDs for this purpose. Several DC voltages and surge discharge capabilities. DC power SPDs are using pluggable feature in order to ease the maintenance operations. DIN rail mounting.
when LAN is used and the transmission is performed through copper lines (instead fiber optic), the risk of damage due to surge voltages is huge.
Dedicated SPDs must be used at the both ends. CITEL has designed a range of SPDs for Ethernet line or PoE surge protection of the remote devices, as LAN connected computers, Wifi Hotstops, IP Survey Cameras. The surge protectors are equipped with RJ45 connectors for easy installation and are available up to Category 6 cabling and 10Gbit Ethernet. Indoor or Outdoor applications.
When video signal for survey are used through coaxial cables, SPDs are necessary on the lines. CITEL offers a wide range of coaxial line surge protectors to be used directly on the cable. These SPDs are in compliance with all types of connectors and bandwiths.
Analog Video survey cameras must be protected against surge voltages as they are especially exposed. To provide efficient protection, SPD must be installed on the video coaxial line but also on the power supply (AC or DC), and control lines (pan, tilt, rotate, zoom operations). MSP-VM range from CITEL is a «3-in-1» SPD to protect correctly all the incoming connections of the survey cameras.
Weighting systems could be damaged by lightning surges and their failures will create huge problems in equipement destruction and production interruption. CITEL has developped a specific SPD for the surge protection of the load cells (BP-LC Load cell surge protector)
Tại các trạm thu phí và kiểm soát giao thông trên đường đi được trang bị rất nhiều hệ thống với các chức năng chuyên biệt, ngoài hệ thống kim thu sét bảo vệ bên ngoài khỏi sét đánh trực tiếp thì chúng ta cần lắp đặt các thiết bị chống sét lan truyền phù hợp với mỗi hệ thống của trạm.
Các đề xuất chính trong giải pháp chống sét lan truyền cho trạm thu phí gồm:
Giải pháp chống sét lan truyền cho trạm thu phí hệ thống giao thông thông minh ITS
Các hệ thống giám sát từ xa dọc theo tuyến đường giao thông gồm các bảng hiệu, camera quan sát, camera đo tốc độ, cảm biến đo tốc độ, cảm biến dẫn đường .. Tất cả các thiết bị này cũng đều phải được bảo vệ, phải được trang bị giải pháp chống sét lan truyền cho thiết bị giám sát từ xa tương ứng (như ở trạm thu phí)
Giải pháp chống sét lan truyền cho thiết bị giám sát từ xa của hệ thống giao thông thông minh ITS
Tại các nút giao lộ như ngã 3, ngã 4, đường dẫn lên xuống cao tốc .v.v. đều được bố trí các cột đèn tín hiệu giao thông, camera giám sát, bảng thông báo và các cảm biến khác trong hệ thống giao thông thông minh ... Các thiết bị này cũng cần được bảo vệ chống sét như các điểm giám sát giao thông từ xa như trên.
Giải pháp chống sét lan truyền cho các nút giao trong hệ thống giao thông thông minh
Trung tâm quản lý và điều hành giao thông là đơn vị quan trọng nhất trong hệ thống quản lý giao thông thông minh, đây là đơn vị có chức năng thu thập dữ liệu, truyền dữ liệu, phân tích và đưa ra các quyết định quan trọng để đảm bảo cho toàn bộ hệ thống giao thông vận hành đúng chức năng.
Hệ thống chống sét đầy đủ và chuyên nghiệp là một trong những vấn đề cần ưu tiên hàng đầu để đảm bảo an toàn cho tài sản, đảm bảo các thiết bị máy móc vận hành ổn định và lâu dài, đảm bảo độ chính xác và thông suốt cho toàn bộ hệ thống.
Giải pháp chống sét lan truyền cho trung tâm điều hình quản lý hệ thống giao thông thông minh ITS
Các trạm cân tải trong xe tham giao giao thông được đặt dọc theo các đường vận chuyển, chúng thường bị sét đánh hỏng các bộ cảm biến Load cell, các đầu cân, máy tính và các bảng báo. Do vậy, cũng cần trang bị giải pháp chống sét cho trạm cân ô tô đầy đủ, để đảm bảo cho hệ thống luôn được an toàn và vận hành ổn định.
Sử dụng thiết bị chống sét Load Cell BP-LC để bảo vệ cho đầu cân và cảm biến trọng lượng.