• Series
    DS100EG
  • Model
    DS100EG-600
  • Brand / Made in
    CITEL / FRANCE
  • Type 1 N/PE surge protector
  • Iimp : 50 kA (10/350µs)
  • Imax : 150 kA (8/20µs)
  • Compatible with DS250E, DS150E & DS250VG series
  • IEC/EN 61643-11 compliance
  • Certification UL / EAC

DS100EG-600 Type 1 N/PE AC surge protector - 1 pole

This Type 1 Surge Protector is designed to be used in association with DS250E, DS150E & DS250VG surge protectors to provide common and differential surge protection for AC networks , following the «CT2» configuration in IEC60364-5-534 standard. 
The DS100EG-600 is connected between the Neutral (N) and Protective Earth (PE) wires. The DS100EG-600 is based on CITEL P100 high energy gas tube, which provides much lower residual voltages than the air spark gap technology and a very high discharge current capability on a 10/350 μs or 8/20 μs impulses. It is mechanically similar to the DS250E, DS150E & DS250VG series, therefore making easy to use both products jointly.

Electrical Characteristics

  • SPD type: Type 1 N/PE
  • Network: 230/400 V
  • Max. AC operating voltage Uc: 255 Vac
  • Temporary Over Voltage (TOV) Charasteristics - 5 sec (Without disconnection) UT: 335 Vac withstand
  • Temporary Over Voltage (TOV) Charasteristics - 120 mn (Without disconnection or with safety disconnection) UT: 440 Vac withstand
  • Temporary Over Voltage N/PE (TOV HT) (Without disconnection or with safety disconnection) UT: 1200 V/300A/200 ms withstand
  • Residual Current (Leakage current to Ground) Ipe: None
  • Follow current interrupting capability Ifi: > 100 A
  • Nominal discharge current (15 x 8/20 µs impulses) In: 70 kA
  • Max. discharge current (max. withstand @ 8/20 µs by pole) Imax: 150 kA
  • Impulse current by pole (max. withstand 10/350µs by pole) Iimp: 50 kA
  • Protection level N/PE(@ In (8/20µs) and @ 6 kV (1,2/50 µs)) Up N/PE: 1.5 kV

Mechanical Characteristics

  • Connection to Network: By screw terminals: 6-35mm² / by bus
  • Format: Monobloc modular box
  • Mounting: Symmetrical rail 35 mm (EN 60715)
  • Housing material: Thermoplastic UL94 V-0
  • Operating temperature: -40/+85°C
  • Protection rating: IP20
  • Outdoor application: No
  • Dimensions: See diagram
  • Weight: 0.203 kg

Standards

  • Standards compliance IEC 61643-11 / EN 61643-11
  • Certification UL / EAC
closet

CART

No products in your cart
Báo Giá Sản Phẩm