DACN1-25CVGS-31-275 Type 1+2+3 AC surge protector - 3-phase+N, 25kA/100kA

Reference price :

Select a product to request a quote

DACN1-25CVGS-31-275 Type 1+2+3 AC surge protector - 3-phase+N, 25kA/100kA

Name: DACN1-25CVGS-31-275 Type 1+2+3 AC surge protector - 3-phase+N, 25kA/100kA
Brand: CITEL
SKU: DACN1-25CVGS-31-275
Availability: InStock
Rating: 5 (1 reviews)

Series

DACN1-25C
Model

DACN1-25CVGS-31-275
Brand / Made in

CITEL / FRANCE

Type 1 + 2+3 AC surge protector
Network: 230/400 V 3-phase+N
VG Technology (MOV+GSG)
Iimp: 25 kA (10/350µs)
Imax: 100 kA (8/20µs)
Optimized to TOV
No leakage current
Monobloc, compact design
Remote signaling of disconnection
EN 61643-11, IEC 61643-11 complied

DACN1-25CVGS series

The "Surge protector" solution to protect and analyse your installations

The new SPDs DACN1-25CVGS are the designated successors to the existing DS250 and DUT250 series. As such, these surge protectors feature a number of evolutionary improvements, such as the more compact housing, dual disconnect mechanism and remote signaling.

Typical applications

The new DACN1-25CVGS are designed for use on the AC side in critical infrastructures, large industrial installations and important installations for professional use which require closer monitoring and are very likely to be exposed to frequent overvoltages in order to avoid downtime or need to be monitored regularly/annually in accordance with IEC 62305-3, E7.

For example: hospitals and medical establishments, broadcasting and mobile communication networks, electricity suppliers, street cabinets, venues for major events/stadiums, industrial production sites, etc.

Product specifications

Product specifications
product manual
Download file

Electrical Characteristics

SPD type: 1+2+3
Network: 230/400 V 3-phase+N
AC system: TT-TNS
Max. AC operating voltage Uc: 275 Vac
Temporary Over Voltage (TOV) Charasteristics - 5 sec (Without disconnection) UT: 335 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn (Without disconnection or with safety disconnection) UT: 440 Vac withstand
Residual Current (Leakage current to Ground) Ipe: None
Follow current If: None
Nominal discharge current (15 x 8/20 µs impulses) In: 25 kA
Max. discharge current (max. withstand @ 8/20 µs by pole) Imax: 100 kA
Impulse current by pole (max. withstand 10/350µs by pole) Iimp: 25 kA
Total lightning current (max. total withstand @ 10/350µs) Itotal: 100 kA
Withstand on Combinaison waveform IEC 61643-11 Class III test: 1.2/50µs - 8/20µs Uoc: 6 kV
Protection level @ In (8/20µs) and @ 6 kV (1,2/50 µs) Up: 1.5 kV
Admissible short-circuit current Isccr: 50000 A

Mechanical Characteristics

Technology: VG Technology (MOV+GSG)
SPD configuration: 3-phase+Neutral
Connection to Network: By screw terminals: 2.5-25mm² (35mm² rigid)
Format: Monobloc modular box
Mounting: Symmetrical rail 35 mm (EN60715)
Housing material: Thermoplastic UL94-V0
Operating temperature: -40/+85°C
Protection rating: IP20
Failsafe mode: Disconnection from AC network
Disconnection indicator: 1 mechanical indicator - Red/Green
Remote signaling of disconnection: Output on changeover contact
Wiring for remote signaling: 1.5 mm² max.
Max. Voltage/Current for remote signaling: 250 V / 0.5 A (AC) / 30 V / 3 A (DC)

Disconnectors

Thermal disconnector: Internal
Installation ground fault breaker: Type S or delayed
Back-up protection device: 125 A min. - 315 A max. - Fuses Type gG

Standards

Standards compliance: IEC 61643-11 / EN 61643-11

INSTALLATION

DACN1-25CVGS-31-275 Type 1+2+3 AC surge protector is connected in parallel on the AC network and must be equipped with external fuses for short-circuit current protection

The total length of parallel connection wires to AC network must be lower than 0.5 m in order not to increase the protection level (Up) provided by the SPD.
Wiring is made by screw connections.
The protection wire coming from the SPD must be connected to the bonding bar of the electrical panel. Paralleling the protection wire with phases conductors must be avoided.
The cross sectional wire must be 6 mm² minimum for Type 2 SPD and 16 mm² for Type 1.
Local earthing resistance must be in compliance with the electrical rules.