DS250VG-1000 Type 1+2+3 AC surge protector - 1-pole

Electrical Characteristics

• SPD type: 1+2+3
• Network: 1000 V 
• Nominal line voltage Un: 900 Vac
• Max. AC operating voltage Uc: 1000 Vac
• Max. load current IL: 100 A
• Temporary Over Voltage (TOV) Charasteristics - 5 sec (Without disconnection) UT: 1320 Vac withstand
• Temporary Over Voltage (TOV) Charasteristics - 120 mn (Without disconnection or with safety disconnection) UT: 1732 Vac withstand
• Residual Current Ipe: None
• Follow current If: None
• Nominal discharge current (15 x 8/20 µs impulses) In: 30 kA
• Max. discharge current (max. withstand @ 8/20 µs by pole) Imax: 60 kA
• Impulse current by pole (max. withstand 10/350µs by pole) Iimp: 25 kA
• Withstand on Combinaison waveform IEC 61643-11 Class III test: 1.2/50µs - 8/20µs Uoc: 6 kV
• Admissible short-circuit current Isccr: 50 kA
• Connection mode(s): L/N or L/PE
• Protection mode(s): Common or Differential mode
• Protection level @ In (8/20µs) Up: <3.4 kV
• Specific energy by pole max. withstand 10/350 µs W/R: 156 kJ/ohm

Mechanical Characteristics

• Technology: VG
• SPD configuration: 1-pole
• Connection to Network: By screw : 6-35 mm² (50mm² flexible)
• Format: 1-pole modular box 
• Mounting: Symmetrical rail 35 mm (EN60715)
• Housing material: Thermoplastic UL94-V0
• Operating temperature: -40/+85°C
• Protection rating: IP20
• Failsafe behavior: Disconnection
• Disconnection indicator: 1 mechanical indicator
• Remote signaling of disconnection: Output on changeover contact
• Dimensions: See diagram

Disconnectors

• Thermal disconnector: Internal
• Installation ground fault breaker: Type S or delayed
• Fuses: Fuses Type gG - 315 A

Standards

• Standards compliance: IEC 61643-11 / EN 61643-11 / UL1449