KIT ATCONTROL/R PT-M 63 - Kit with Single-phase protector against permanent and transient overvoltages

Reference price :

Select a product to request a quote

KIT ATCONTROL/R PT-M 63 - Kit with Single-phase protector against permanent and transient overvoltages

Name: KIT ATCONTROL/R PT-M 63 - Kit with Single-phase protector against permanent and transient overvoltages
Brand: AT
SKU: AT-8757
Availability: InStock
Rating: 5 (1 reviews)

Series

KIT ATCONTROL/R
Model

AT-8757
Brand / Made in

AT / SPAIN

Nominal current: 63 A
Type of line: Single-phase
Nominal voltage (L-N) Un: 230 V
Maximum overvoltage (L-N) Uc: 400 V
Working characteristics for overvoltages: 275 V (3-5 s), 400 V (0,1-0,2 s)
Test type according to UNE-EN61643-11: Type 2
Maximum discharge current (8/20 µs wave) lmax: 15 kA
Protection level at In (1,2/50 µs wave) Up: 1.1 kV

KIT ATCONTROL/R - Kit protector against permanent (and transient) overvoltages, with self-reclosing and contactor

KIT ATCONTROL/R protectors cut off the power supply when they detect a permanent overvoltage or undervoltage, (for example, a fault in the neutral), thus protecting the equipment installed downstream.

Self-reclosing protector: when the permanent overvoltage comes to a halt, the protector reconnects the contactor.

Moreover, they also actuate when they detect a transient overvoltage, driving the current to earth and reducing the voltage to a level that does not damage the connected equipment. Tested and certified as protector Type 2 in official and independent laboratories according to standard EN IEC 61643-11.

It has a test button to check that installation has been executed correctly.

KIT ATCONTROL/R PT-M 63 - Kit with Single-phase protector against permanent and transient overvoltages, with self-reclosing and 63A contactor. Actuating time 275V→3-5s / 400V→0,1-0,2s. Imax=15kA. Up = 1.1kV.

Product specifications

Product specifications
product manual
Download file

Name: KIT ATCONTROL/R PT-M 63

Reference: AT-8757

DIMENSIONS

Protector dimensions: 36 x 90 x 80 mm - 2 DIN modules (DIN 43880)
Contactor dimensions: 36 x 90 x 80 mm - 2 DIN modules (DIN 43880)

ELECTRICALS

Nominal current: 63 A
Type of line: Single-phase
Nominal voltage (L-N) Un: 230 V
Maximum overvoltage (L-N) Uc: 400 V
Actuation voltage V1 (L-N) Ua: 275 V
Actuation time at V1: 3-5 s
Actuation voltage V2 (L-N): 400 V
Actuation time (V2): 0,1-0,2 s

Protection against transient overvoltages

Test type according to UNE-EN61643-11: Type 2
Protection categories according to the REBT: I, II, III, IV
Nominal discharge current (8/20 µs wave) ln: 5 kA
Maximum discharge current (8/20 µs wave) lmax: 15 kA
Protection level at In (1,2/50 µs wave) Up: 1.1 kV

CONSTRUCTION

Type of connection: Parallel (one port)
Fixing: DIN Rail
Enclosure material: Polyamide
Insulation resistance: > 10^14 Ω
Self-extinguishing enclosure: V-0 Type according to UNE-EN IEC 60707 (UL94)
Nr. of poles: 2
Warning for permanent overvoltages: Warning light. Green light: correct mains voltage. Red: overvoltage
Warning for transient overvoltages: Warning mechanism. Yellow: protector status ok. Black: Replace

ENVIRONMENTAL

Working temperature: -40 to +70 °C
Protector location: Indoor
Enclosure protection: IP20

CONNECTION

Protector cables:

+ Min/Max section: 2.5 / 35 mm2
+ Screw: Philips, H2
+ Tightening: 3 N·m

Activation cables (S1, S2):

+ Min/Max section: 1 / 1.5 mm2
+ Screw: DIN 5264, M 2
+ Tightening: 0.25 N·m

Cables of contactor:

+ Min/Max section: 1 / 16 mm2
+ Screw: Philips, H2
+ Tightening: 2 N·m

TESTS AND CERTIFICATIONS

Certificated tests according to the standard: UNE-EN IEC 61643-11
UNE-EN 50550 (POP)
Relevant standards: UNE 21186, UNE-EN IEC 62305
Products compliant with EC requirements.

INSTALLATION

They must be installed in parallel with the low voltage supply line, downstream from the circuit breaker.
The contactor should be installed in series with the low voltage supply line, downstream from the protector.
Connect the S1 and S2 terminals to the contactor, always without voltage.

SAFETY AND MAINTENANCE