IGA TEST M 32 PLUS single-phase protector against permanent overvoltages & undervoltages

Reference price :

Select a product to request a quote

IGA TEST M 32 PLUS single-phase protector against permanent overvoltages & undervoltages

Name: IGA TEST M 32 PLUS single-phase protector against permanent overvoltages & undervoltages
Brand: AT
SKU: AT-9032
Availability: InStock
Rating: 5 (1 reviews)

Series

IGA TEST M PLUS
Model

AT-9032
Brand / Made in

AT / SPAIN

Nominal current: 32 A
Type of line: Single-phase
Maximum short-circuit current: 6 kA
Nominal voltage (L-N) Un: 230 V
Maximum overvoltage (L-N) Uc: 400 V
Minimum operating voltage (L-N): 80 V
Working characteristics for overvoltages: 275 V (8-10 s), 400 V (0,1-0,2 s)
Working characteristics for undervoltages: 200 V (0.8 s), 80 V (0.2 s)

IGA TEST PLUS - Protector against permanent overvoltages and undervoltages with integrated miniature circuit breaker.

IGA TEST PLUS series protectors cut off the power supply when they detect a permanent overvoltage or undervoltage, (for example, a fault in the neutral), thus protecting the equipment installed downstream.

IGA TEST PLUS protectors against permanent overvoltages can be installed together with ATSUB-D transient overvoltage protectors.

The integrated MCB is available for the most usual nominal currents: 25, 32, 40, 50 and 63 A.

IGA TEST PLUS series protectors have been tested in official, independent laboratories obtaining their characteristics according to applicable standards.

IGA TEST M 32 PLUS - Single-phase protector against permanent overvoltages and undervoltages, with integrated MCB, nominal current 32A. Actuating time 275V -> 8-10s / 400V -> 0,1-0,2s: 80V -> 0,2s / 200V -> 0,8s

IGA TEST M PLUS series:

Name	Reference	Nominal current (A)	Type of line	Number of DIN modules
IGA TEST M 25 PLUS	AT-9031	25	single-phase	3
IGA TEST M 32 PLUS	AT-9032	32	single-phase	3
IGA TEST M 40 PLUS	AT-9033	40	single-phase	3
IGA TEST M 50 PLUS	AT-9034	50	single-phase	3
IGA TEST M 63 PLUS	AT-9035	63	single-phase	3

Product specifications

Product specifications
product manual
Download file

Name: IGA TEST M 32 PLUS
Reference: AT-9032

DIMENSIONS

Protector dimensions: 51 x 81 x 65 mm
Number of DIN modules (DIN 43880) of the protector: 3

ELECTRICALS

Nominal current: 32 A
Type of line: Single-phase
Maximum short-circuit current: 6 kA
Nominal voltage (L-N) Un: 230 V
Maximum overvoltage (L-N) Uc: 400 V
Minimum operating voltage (L-N): 80 V
Working characteristics for overvoltages:

+ Actuation voltage V1 (L-N) Ua: 275 V
+ Actuation time at V1: 8-10 s
+ Actuation voltage V2 (L-N): 400 V
+ Actuation time (V2): 0,1-0,2 s

Working characteristics for undervoltages:

+ Actuation voltage V1 (L-N) Ua: 200 V
+ Actuation time at V1: 0.8 s
+ Actuation voltage V2 (L-N): 80 V
+ Actuation time at V2: 0.2 s
CONSTRUCTION

Fixing: DIN Rail
Insulation resistance: > 10^14 Ω
Self-extinguishing enclosure: V-0 Type according to UNE-EN IEC 60707 (UL94)
Nr. of poles: 2

ENVIRONMENTAL

Working temperature: -5 to +40 °C
Protector location: Indoor
Enclosure protection: IP20

CONNECTION

Protector cables:

+ Min/Max section: 4 / 25 mm2
+ Screw: Philips, H2
+ Tightening: 3 N·m

Activation cables (S1, S2):

+ Min/Max section: 1 / 4 mm2
+ Screw: Philips, H1
+ Tightening: 1.2 N·m
TESTS AND CERTIFICATIONS

Certificated tests according to the standard: UNE-EN IEC 61643-11
UNE-EN IEC 60898
UNE-EN 50550 (POP)
Relevant standards: UNE 21186, UNE-EN IEC 62305
Products compliant with EC requirements.

INSTALLATION

They must be installed in series with the low voltage line, with the input at the top of the protector (L, N).
The protective coil must be installed between the line and the neutral at the bottom of the protector.

SAFETY AND MAINTENANCE