PL12-CAT6 19" patch panel surge protector for 12 ports 10Gb Ethernet

Reference price :

Select a product to request a quote

PL12-CAT6 19" patch panel surge protector for 12 ports 10Gb Ethernet

Name: PL12-CAT6 19" patch panel surge protector for 12 ports 10Gb Ethernet
Brand: CITEL
SKU: PL12-CAT6
Availability: InStock
Rating: 5 (1 reviews)

Series

PL
Model

PL12-CAT6
Brand / Made in

CITEL / Pháp

Description: 19'' patch panel surge protector for high speed network STP
Standards compliance: IEC 61643-21 / EN 61643-21 / UL497 B / IEEE 802-3an
Technology: GDT+TVS diode
SPD configuration: 12 ports de 8 wires
Remote signaling of disconnection: No
Network: 10 Gigabit Ethernet, Cat.6 cabling
Max. DC operating voltage: 8 Vdc

PL12-CAT6

The PLx-CAT6 are surge protection devices in 19" format and offer protection against lightning and surge voltages for sensitive interfaces connected in a Gigabit Ethernet network. The protection circuit consists of a highly efficient combination of 3-pole gas arresters and low-capacitance diodes. The protection components are connected via standard RJ45 plugs. Up to 24 ports can be protected with the PL24-CAT6. The 19'' format allows easy installation in all standard 19'' cabinets.

Product specifications

Product specifications
product manual
Download file

Electrical Characteristics

Network: 10Gigabit Ethernet, Cat.6 cabling
Nominal line voltage Un: 5 Vdc
Max. DC operating voltage Uc: 8 Vdc
Max. load current IL: 1000 mA
Max. data rate: 10 Gbps
Max. frequency f: 250 MHz
Insertion loss: < 1 dB
Protection level Following the test category C3 (IEC61643-21) - Line/Line: Up 20 V
Max. shunt capacitance C: < 25 pF
Impulse current 2 x 10/350μs Test - D1 Category Iimp: 500 A
Line/Line Nominal discharge current 8/20μs Test x 10 - C2 Category In L/L: 500 A
Line/Ground Nominal discharge current 8/20μs Test x 10 - C2 Category In L/PE: 2000 A

Mechanical Characteristics

Technology: GDT+clamping diode
SPD configuration: 12 ports de 8 wires
Connection to Network: RJ45 shielded female input/output
Format: Rack 19''
Mounting: Baie 19''
Housing material: Aluminium
Operating temperature: -40/+85°C
Protection rating: IP20
Failsafe behavior: Short-circuit
Disconnection: indicator Transmission interrupt
Spare module(s): 12-port PCB
Remote signaling of disconnection: no
Pin outs: (1-2)(3-6)(4-5)(7-8)
Dimensions: See diagram

Standards

Standards compliance: IEC 61643

INSTALLATION

The surge protector for IT networks must be installed while respecting the following principles:

SPDs must be installed on the both sides of the transmission line (e.g. server side and terminal equipment side)
The surge protector and the protected equipment must be interconnected with the bonding network of the installation.
The earthing conductor (between the earth output of the SPD and the bonding circuit of the installation) must be as short as possible (less than 0.5m).
The AC power supply of the equipment must also be surge protected.