Reference price :
Contact us
  • Series
    DS70R
  • Model
    DS72R-400
  • Brand / Made in
    CITEL / FRANCE
  • Description: Type 2 AC surge protector single-phase
  • Network: 230 V sigle phase (L+N)
  • AC system: IT
  • Max. AC operating voltage : 440 Vac
  • Residual Current : < 2 mA
  • Max. discharge current by pole : 70 kA
  • Total Maximum discharge current : 1400 kA
  • Admissible short-circuit current: 25 000 A
  • Technology: MOV
  • Remote signaling of disconnection: option DS74RS-400 : output on changeover contact
  • Standards compliance: IEC 61643-11 / EN 61643-11 / UL1449 ed.5
  • Certification: CSA /EAC/UL

DS70R type 2 AC surge protector

They are used mainly for primary protection of single and three-phase networks at the main electrical panel. They provide common-mode protection and are available in one-phase, single-phase, 3-phase and 3-phase+Neutral. This SPD is based on association of high energy varistors equipped with thermal disconnector and failure indicator, to comply with standards. The DS70R surge protectors are designed to be used in a multipolar configuration to protect single-phase, 3-phase or 3-phase+N AC networks. Each pole of the SPD is connected between Line(s) and PE and Neutral and PE.

Version with a remote signaling for disconnection indication is also available (DS7*RS). The DS70R is available for the main values of AC voltages. The DS70R is DIN rail compatible and is built with a plug-in module (DSM70R-xxx) and a fixed base, which allows an easy and fast maintenance.

ELECTRICAL PROPERTIES

  • SPD type: 2
  • Network: 230 V single-phase (L+N)
  • AC system: IT
  • Nominal line voltage Un: 400 Vac
  • Max. AC operating voltage Uc: 440 Vac
  • Temporary Over Voltage (TOV) Charasteristics - 5 sec UT: 580 Vac withstand
  • Temporary Over Voltage (TOV) Charasteristics - 120 mn UT: 770 Vac disconnection
  • Residual Current Ipe: < 2 mA
  • Operating current Ic: < 1 mA
  • Follow current If: None
  • Nominal discharge current In: 30 kA
  • Max. discharge current Imax by pole: 70 kA
  • Total Maximum discharge current Imax Total: 140 kA
  • Protection mode(s): L/PE and N/PE
  • Protection mode(s): Common mode 
  • Residuel voltage at 5 kA Up-5kA: 1.2 kV
  • Protection level N/PE Up N/PE: 1.8 kV
  • Protection level L/PE Up L/PE: 1.8 kV
  • Residuel voltage at 5 kA Up-10kA: 1.4 kV
  • Admissible short-circuit current Isccr: 25 000 A
  • Internal short circuit protection: No
  • Internal Thermal protection: Yes

MECHANICAL PROPERTIES

  • Technology: MOV
  • SPD configuration: single-phase
  • Connection to Network: By screw terminals: 2.5-25mm² / by bus
  • Format: Plug-in modular box
  • Mounting: Symmetrical rail 35 mm (EN 60715)
  • Housing material: Thermoplastic UL94 V-0
  • Operating temperature: -40/+85°C
  • Protection rating: IP20
  • Failsafe mode: Disconnection 
  • Disconnection indicator: 2 mechanical indicator by pole
  • Spare module(s): DSM70R-400
  • Remote signaling of disconnection: option DS72RS-400 : output on changeover contact
  • Dimensions: 2TE 

DISCONNECTORS

  • Thermal disconnector: Internal
  • Installation ground fault breaker: Type S or delayed
  • Fuses: Fuses type gG 100A

STANDARDS

  • Standards compliance: IEC 61643-11 / EN 61643-11 / UL1449 
  • Certification: CSA /EAC/UL

INSTALLATION

DS72R-400 Type 2 AC surge protector single-phase is connected in parallel on the AC network and must be equipped with external fuses for short-circuit current protection

  • The total length of parallel connection wires to AC network must be lower than 0.5 m in order not to increase the protection level (Up) provided by the SPD.
  • Wiring is made by screw connections. On some models, a distribution bus can be used.
  • The protection wire coming from the SPD must be connected to the bonding bar of the electrical panel. Paralleling the protection wire with phases conductors must be avoided.
  • The cross sectional wire must be 6 mm² minimum for Type 2 SPD and 16 mm² for Type 1.
  • Local earthing resistance must be in compliance with the electrical rules.

Further information can be found in IEC 61643-12 standard (selection and application principles for low voltage SPD).

 

Hướng dẫn lắp đặt

 

closet

CART

No products in your cart
Báo Giá Sản Phẩm