Surge protection solution for LED Lighting systerm

Surge protection for LED Outdoor lighting

 

LED street lighting is now widely used for its efficiency, its energy cost savings and its life expectancy. Nevertheless this attractive technology has an important weakness: its sensitivity to transient voltages created by lightning or by power switch operations on AC network.

Due to its scattered and over-exposed location, LED lighting system will face induced surges which will create failure of its power supply, damage LED components or loss of the lighting efficiency. For these reasons, the use of relevant surge protectors located upstream the LED lighting systems is highly recommended.

CITEL offers a full range of surge protectors designed to be installed at different points on the lighting network such as streetlights, the base of poles and street cabinets.

CITEL offers solutions adapted to every type of outdoor LED lighting systems : urban, architectural, tunnels etc..

 

Surge protection solution for LED Lighting systerm

 

Giải pháp chống sét cho hệ thống đèn LED

Watch surge protection for LED lighting video

 

 

Applicable products

DINRAIL AC SURGE PROTECTOR View more View less
DAC1-13VG-31-275 Type 1+2+3 AC surge protector - 3-phase+N
DAC1-13VG-31-275
CITEL/ FRANCE
  • Type 1 + 2 + 3 AC surge protector
  • VG Technology
  • Network: 230/400 V 3-phase+N
  • In : 20 kA
  • Iimp : 12.5 kA on 10/350µs impulse
  • No leakage current
  • Pluggable module for each phase
  • Remote signaling (option)
  • Optimized to TOV
  • EN 61643-11, IEC 61643-11 certified
  • UL1449 ed.5 compliance
DAC50-20-275 Type 2 AC surge protector single-phase
DAC50-20-275
CITEL/ FRANCE
  • Description: Type 2 AC surge protector - Single-phase
  • Standards compliance: IEC 61643-11 / EN 61643-11 / UL1449 ed.5
  • Certification: OVE / UL / EAC
  • Technology: MOV
  • SPD configuration: Single phase
  • Remote signaling of disconnection: option DAC50S-20-275: output on changeover contact
  • Network: 230 V single-phase
  • AC system: TN
  • Max. AC operating voltage : 275 Vac
  • Residual Current : < 1 mA
  • Max. discharge current : 50 kA
  • Total Maximum discharge current : 100 kA
  • Admissible short-circuit current: 50 000 A
DAC50VG-31-275 Type 2+3 AC surge protector - 3-phase+N
DAC50VG-31-275
CITEL/ FRANCE
  • Description: Type 2+3 AC surge protector - 3-phase+N
  • Standards compliance: IEC 61643-11 / EN 61643-11 / UL1449 ed.5
  • Certification: KEMA / EAC
  • Technology: VG Technology (MOV+GSG)
  • SPD configuration: 3-phase+Neutral
  • Remote signaling of disconnection: option DAC50VGS-31-275: output on changeover contact
  • Network: 230/400 V 3-phase+N
  • AC system: TT-TNS
  • Max. AC operating voltage: 275 Vac
  • Residual Current: None
  • Max. discharge current: 50 kA
  • Total Maximum discharge current: 50 kA
  • Admissible short-circuit current: 50 000 A
DS98L-400 Type 2+3 AC surge protector single-phase
DS98L-400
CITEL/ FRANCE
  • Cost effective single-phase surge protector
  • Safety disconnection in-line
  • Double connection in series
  • Common/Differential mode
  • SPD type: 2+3
  • Network: 230V single phase
  • AC system: TN
  • Nominal line voltage Un: 230 Vac
  • Max. AC operating voltage Uc: 275 Vac
  • Max. load current IL: 16 A
  • Max. discharge current Imax: 10 kA
  • Total Maximum discharge current Imax Total: 20 kA
  • Standards compliance: IEC 61643-11 / EN 61643-11 / UL1449 
  • Certification: EAC 
MLPC1-230L-V Type 2+3 AC surge protector single-phase for led lighting system class 1
MLPC1-230L-V
CITEL/ FRANCE
  • Description: Type 2+3 AC surge protector for LED Lighting system Class 1
  • Standards compliance: EN 61643-11 / IEC 61643-11
  • Certification: IEC / EAC / TUV /IMQ
  • Technology: MOV+GDT
  • Network: 220-240 V Single-phase
  • AC system: TT-TN
  • Max. AC operating voltage: 320 Vac
  • Max. load current: 5 A
  • Residual Current: None
  • Max. discharge current: 10 kA
  • Total Maximum discharge current: 20 kA
  • Admissible short-circuit current: 10 000 A
  • Protection rating: IP20
MLPX1-230L-W Type 2+3 ultra compact hard wired surge protector for led lighting system class 1
MLPX1-230L-W
CITEL/ FRANCE
  • Description: Ultra Compact Type 2+3 hard wired surge protector
  • Standards compliance: IEC 61643-11 / EN 61643-11 / UL1449 ed.5
  • Certification: CB / EAC
  • Technology: MOV+GDT
  • Network: 220-240 V Single-phase
  • AC system: TT-TN
  • Max. AC operating voltage: 320 Vac
  • Max. load current: 10 A
  • Residual Current: None
  • Max. discharge current: 10 kA
  • Total Maximum discharge current : 20 kA
  • Admissible short-circuit current: 10 000 A
  • Protection rating: 67
MSB6-400 Type 3 ultra compact hard wired surge protector
MSB6-400
CITEL/ FRANCE
  • Description: Ultra Compact Type 3 hard wired surge protector
  • Standards compliance: IEC 61643-11 / EN 61643-11 / UL1449 ed.5
  • Certification: EAC
  • Technology: MOV+GSG
  • Network: 230 V Single-phase
  • AC system: TT-TN
  • Max. AC operating voltage: 255 Vac
  • Max. discharge current: 6 kA
  • Admissible short-circuit current: 3000 A
  • Protection rating: IP20
DATA SURGE PROTECTOR View more View less
DLA-12D3 1-pair DIN-rail plug-in Data surge protector for RS232, RS485
DLA-12D3
CITEL/ FRANCE
  • Din rail plug-in surge protector
  • 1-pair
  • Un: 12 V
  • Shield wire protection
  • Plug-out without line cut-off
  • IEC 61643-21 compliance
  • UL497A
MJ8-POE-C6A surge protector for PoE++ and 10Gb Ethernet
MJ8-POE-C6A
CITEL/ FRANCE
  • POE++ compatible
  • Gigabit Ethernet (Cat.6A)
  • Shielded enclosure and connectors
  • 2 kA discharge capability
  • UL497B certified
  • IEC 61643-21, EN 61643-21 compliance
Product Quote
closet

CART

No products in your cart