• Series
    DAC50VG
  • Model
    DAC50VGS-31-275
  • Brand / Made in
    CITEL / FRANCE
  • Type 2 + 3 AC surge protector
  • VG Technology
  • In : 20 kA
  • No leakage current
  • Pluggable module for each phase
  • Remote signaling
  • Optimized to TOV
  • EN 61643-11, IEC 61643-11 and UL1449 ed.5 compliance

DAC50VGS-31-275

The pluggable surge protectors Type 2+3 DAC50VG, are designed to protect AC powerline at the main switchboard of the installation. Equipped with the exclusive CITEL’s VG technology, the range achieves an improved protection level and a total absence of leakage current, guaranteeing a maximum protection efficiency, a simplification of use (no additional SPD required) and a maximum lifetime. The surge protectors DAC50VG, are available in multipolar version and in several voltages to protect single or 3-phase networks.

ELECTRICAL PROPERTIES

  • SPD type: 2+3
  • Network: 230/400 V 3-phase+N
  • AC system: TT-TNS
  • Max. AC operating voltage Uc: 275 Vac
  • Temporary Over Voltage (TOV) Charasteristics - 5 sec.(Without disconnection) UT: 335 Vac withstand
  • Temporary Over Voltage (TOV) Charasteristics - 120 mn (Without disconnection or with safety disconnection) UT: 440 Vac withstand
  • Temporary Over Voltage N/PE (TOV HT) (Without disconnection or with safety disconnection) UT: 1200 V/300A/200 ms withstand
  • Residual Current (Leakage current to Ground) Ipe: None
  • Follow current If: None
  • Nominal discharge current (15 x 8/20 μs impulses) In: 20 kA
  • Max. discharge current (max. withstand @ 8/20 μs by pole) Imax: 50 kA
  • Total Maximum discharge current (max. total withstand @ 8/20 μs ) ImaxTotal: 50 kA
  • Withstand on Combination waveform IEC 61643-11 (Class III test: 1.2/50μs - 8/20μs) Uoc: 6 kV
  • Connection mode(s): L/N and N/PE
  • Protection level L/N (@ In (8/20μs)) Up: L/N 1.5 kV
  • Residual voltage L/N at 5 kA (@ 5 kA (8/20μs)) Up-5kA: 0.7 kV
  • Protection level N/PE at 5 kA(@ 5 kA (8/20μs)) Up-5kA" 0.7 kV
  • Admissible short-circuit current Isccr: 50 000 A

Mechanical Characteristics

  • Technology: VG Technology (MOV+GSG)
  • SPD configuration: 3-phase+Neutral
  • Connection to Network: By screw terminals: 2.5-25mm² (35mm² rigid)
  • Format: Plug-in modular box
  • Plugable: Yes
  • Mounting: Symmetrical rail 35 mm (EN 60715)
  • Housing material: Thermoplastic UL94 V-0
  • Operating temperature Tu: -40/+85°C
  • Protection rating: IP20
  • Failsafe mode: Disconnection from AC network
  • Disconnection indicator: 1 mechanical indicator by pole - Red/Green
  • Spare module(s): MDAC50VG-275+MDAC50G-275
  • Remote signaling of disconnection: Output on changeover contact
  • Wiring for remote signaling 1.5 mm² max.
  • Max. Voltage/Current for remote signaling: 250 V / 0.5 A (AC) / 30 V / 3 A (DC)
  • Dimensions: See diagram - 4TE (EN43880)
  • Weight: 0.343 kg

Disconnectors

  • Thermal disconnector: Internal
  • Installation ground fault breaker: Type 'S' or delayed
  • Fuses: 50 A min. - 160 A max. - Fuses Type gG

Standards

  • Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 ed.4

 

 

closet