Reference price :
Contact us
  • Series
    Dat Controler Plus
  • Model
    AT-1515
  • Brand / Made in
    AT / SPAIN
  • Advance time: 15µs obtained according to UNE21186:2011 tests.
  • AENOR product certification.
  • Withstand current higher than 200kA (10/350µs wave).
  • Certificate of performance under rain (Insulation > 95% according to EN 60060).
  • No external power supply required.
  • Protection radius up to 75 meters according to NF C 17102 and UNE21186.
  • Certificate of use in explosive atmospheres (ATEX).
  • Manufactured according to ISO 9001 and following ISO 14001 environmental management standard.

DAT CONTROLER® PLUS

Early streamer emission air terminal

DAT CONTROLER® PLUS 15: Early Streamer Emission air terminal. Advance time: 15μs. Protection radius for Protection Level IV and 6 meters height: 52 meters according to NF C 17102 and UNE21186.

 

GENERAL DESCRIPTION

DAT CONTROLER® PLUS is an Early Streamer Emission (ESE) air terminal based on the electrical characteristics of lightning formation. The air terminal triggers the continuous upward leader before any other object within its radius of protection. This feature is referred to in the regulations as the advance time of an ESE air terminal (ΔT). The earlier the upward leader is triggered, the larger is the distance where the downward leader is intercepted, thus protecting a greater area against lightning (standards limit it to ΔT ≤ 60 μs).

 

DAT CONTROLER® PLUS CERTIFICATIONS

RADIUS PROTECTION CERTIFICATE AND REGULATION COMPLIANCE

Radius protection certificate for each model and level calculated according to standards UNE 21186:2011, NF C 17-102:2011 and NP 4426:2013.

AENOR PRODUCT CERTIFICATION NO. 058/000005

  • Certified resistance to extreme environmental conditions (salt mist test and humid sulphurous atmosphere treatment).
  • Certified withstand current: 100kA (10/350μs).
  • Certified advance time ΔT (Annex C, NF C 17-102:2011).

WITHSTAND CURRENT CERTIFICATE FOR 20 IMPACTS OF 100KA (10/350μs)

Direct application of 20 current impulses (10/350μs) with a peak current higher than 100 kA and specific energy greater than 2.5 MJ/Ω (with positive and negative polarity), according to UNE-EN 60060-1 and IEC 61083-1.

CERTIFICATE OF PERFORMANCE UNDER RAIN

Insulation above 95%

These tests have been performed according to standard UNE-EN 60060-1:2012 in the Electrical Technology lnstitute (ITE).

  • Comparative dry/rain tests with continuous voltage (simulating the electric field during a storm).
  • Comparative dry/rain tests with switching impulses (simulating the approach of the downward leader).
  • Comparative dry/rain tests with lightning impulses.

Dòng kim DC Plus đã đạt được nhiều giấy chứng nhận chất lượng thông qua thực nghiệm của các tổ chức quốc tế

 

DAT CONTROLER PLUS ADVANCE TIMES (ΔT)
DAT CONTROLER® PLUS air terminals have passed all the tests according to the standards.
For safety and ease of calculation, the results have been rounded down thus certifying the following advance times (ΔT) in microseconds:

Ref. Model ΔT certified
AT-1515 DAT CONTROLER PLUS 15 15 μs
AT-1530 DAT CONTROLER PLUS 30 30 μs
AT-1545 DAT CONTROLER PLUS 45 45 μs
AT-1560 DAT CONTROLER PLUS 60 60 μs

DATASHEET

  • Reference: AT-1515
  • Dimension: Ø120 mm x 551 mm (height)
  • Weight: 3800 g
  • Materials: AISI 316L stainless steel
  • IP Code: IP67
  • Working temperature: -25 °C to 88 °C
  • Internal insulation: Polyurethane resin
  • Fixing: M20 male thread
  • Type of air terminal: Electropulsator (emits impulses)
  • Certified advance time (ΔT): 15µs
  • Tested current: 20 x 200kA + 5 x 250kA (10/350µs wave)
  • Standard deviation ratio ESE/Simple rod: < 0,8
  • Standards: Complies with UNE 21186:2011; NF C 17-102:2011; NP 4426:2013

 

Protection radius (m)              
Height for protection radius (h) 2 4 6 8 10 20 60
Protection radius (m) for Level I 13 25 32 33 34 35 35
Protection radius (m) for Level II 15 30 38 39 40 44 45
Protection radius (m) for Level III 18 36 46 47 49 55 60
Protection radius (m) for Level IV 20 41 52 54 56 63 75
  

CERTIFICATIONS AND TESTS

  • AENOR Product Certification of accordance with UNE 21186 standard
  • Withstand current certificate for 20 impacts of 100 kA (10/350 µs)
  • Certified advance time
  • Certificate of unalterable performance under rain applying the standard EN 60060-1:2012.
  • Radius protection certificate and regulation compliance (UNE 21186, NFC 17-102).
  • Certificate of use in explosive atmospheres (ATEX).
  • Manufactured according to ISO 9001 and following ISO 14001 environmental management standard.

INSTALLATION

  • ESE air terminal protection radius depends on its height related to the surface to be protected, its advance time ∆T and the protection level.
  • The installation of DAT CONTROLER® PLUS air terminals should follow the standards NF C 17-102:2011, UNE 21186:2011 and NP 4426:2013.
  • The air terminal should be at least 2 meters higher than any object to be protected.

Other products in the same category

closet

CART

No products in your cart
Báo Giá Sản Phẩm