Hotline:

Din-Rail Type 1+ AC Surge Protector

Electrical safety for general electrical cabinets

Din-Rail AC Din-Rail Surge Protector, primary protection with 10/350µs impulse caused by direct lightning currents. Type 1+2 SPD are heavy duty devices designed to be installed at the origin of the AC installation equipped with LPS, designed to protect 1, 2, 3 or 4 wires installed in 1 or 3 phase electrical distribution cabinets, customized to fit clients' needs, ease of installation & maintenance.

Sort by

Products on the page:

Model : DS154E-400

DS154E-400 Type 1+2 AC surge protector - 3-phase+N

Heavy duty Type 1+2 SPD

The DS150E is a Heavy Duty Type 1 AC Surge Protector Device (SPD) designed to be connected at the entrance of the electrical installation. This SPD provides an efficient protection ...

Model : DS134R-280/G

DS134R-280/G Type 1+2 AC surge protector - 3-phase+N

The DS130R is an extreme duty Type 1+2 designed to protect the entrance of the electrical installation. The DS130R is a one-pole SPD and can be used in common mode ...

Model : DS152E-300

DS152E-300 Type 1+2 AC surge protector single-phase

The DS150E is a Heavy Duty Type 1 AC Surge Protector Device (SPD) designed to be connected at the entrance of the electrical installation. This SPD provides an efficient protection ...

Model : DS150E-300

DS150E-300 Type 1+2 AC surge protector - 1 pole

Heavy duty Type 1+2 SPD

The DS150E is a Heavy Duty Type 1 AC Surge Protector Device (SPD) designed to be connected at the entrance of the electrical installation. This SPD provides an efficient protection ...

Model : DUT250VG-300/G

DUT250VG-300/G Type 1+2+3, 3-phase surge protector

Compact and heavy duty Type 1+2+3 SPD

The DUT250VG is a compact and heavy duty Type 1+2+3 SPD, designed to be connected at the entrance of the electrical installation, on a 3-phase 230/400 V AC network. The ...

Model : DS504E-400

DS504E-400 Type 1+2 AC surge protector - 3-phase+N

Very high power type 1+2 SPD

The DS500E range of surge protectors are Type 1 + 2, very high power, they are intended to be installed at the entry of the Low Voltage installation. They are ...

Model : DAC1-13-40-275

DAC1-13-40-275 Type 1+2 AC surge protector - 3-phase+N, 12.5kA / 50kA

DAC1-13-40-275 Type 1+2 AC surge protector - 3-phase+N, 12.5kA / 50kA DAC1-13 range are replacement product for DS13xR The DAC1-13 series are extreme duty Type 1+2 pluggable SPD designed to protect AC powerline ...

Model : DS250VG-690

DS250VG-690 Type 1+2+3 690VAC surge protector - 1 pole

Surge protector for wind generator networks

The DS250VG-690 AC surge protector is designed for 3-phase 690VAC and mainly use for wind generator networks. The `Spark gap + Varistor` technology allows a very low level of protection ...

Model : DS100EG-600

DS100EG-600 Type 1 N/PE AC surge protector - 1 pole

DS100EG-600 Type 1 N/PE AC surge protector - 1 pole This Type 1 Surge Protector is designed to be used in association with DS250E, DS150E & DS250VG surge protectors to provide ...

Model : DS252VG-1000

DS252VG-1000 Type 1+2+3 AC surge protector - sing phase

DS252VG-1000 DS252VG-1000 is a 1-phase 2-wire (L+N) surge arrester set combined from two Citel DS250VG-1000 modules, in which each module will protect each different power wire (L or N). With ...