Hotline:

Din-Rail Type 1+ AC Surge Protector

Electrical safety for general electrical cabinets

Type 1+2 SPD are heavy duty devices designed to be installed at the origin of the AC installation equipped with LPS, designed to protect 1, 2, 3 or 4 wires installed in 1 or 3 phase electrical distribution cabinets, customized to fit clients' needs, ease of installation & maintenance. AC Din-Rail Surge Protector, primary protection with 10/350µs impulse caused by direct lightning currents.

Sort by

Products on the page:

Model : DS250VG-1000

DS250VG-1000 Type 1+2+3 AC surge protector - 1-pole

DS250VG-1000 DS250VG-1000 is a surge arrester for 1 phase (or neutral) wire for power systems from 900Vac to 1000Vac between L-N, belonging to the Type 1+2+3 group with the ability ...

Model : DS252VG-300

DS252VG-300 Type 1+2 AC surge protector single-phase, 25kA/70kA

DS252VG-300 Type 1+2+3 AC surge protector - single phase, 25kA/70kA, VG Technology The products of the range DS250VG is an extreme duty Type 1+2+3 AC surge protector device designed to ...

Model : DS252VG-300/G

DS252VG-300/G Type 1+2+3 AC surge protector single-phase

DS252VG-300/G Type 1+2+3 AC surge protector - single phase, 25kA/70kA, VG Technology The products of the range DS250VG is an extreme duty Type 1+2+3 AC surge protector device designed to ...

Model : DACN1-25CVGS-11-275/SC

DACN1-25CVGS-11-275/SC Type 1+2+3 AC surge protector - single-phase with surge counter integrated

DACN1-25CVGS series New SPD with integrated counter The "Surge protector" solution to protect and analyse your installations The new SPDs DACN1-25CVGS are the designated successors to the existing DS250 and ...

Model : DACN1-25CVGS-31-275/SC

DACN1-25CVGS-31-275/SC Type 1+2+3 AC surge protector - 3-phase+N with surge counter integrated

Model : DAC1-13-31-275

DAC1-13-31-275 Type 1+2 AC surge protector - 3-phase+N, 12.5kA / 50kA

DAC1-13-31-275 Type 1+2 AC surge protector - 3-phase+N, 12.5kA / 50kA DAC1-13 range are replacement product for DS13xR The DAC1-13 series are extreme duty Type 1+2 pluggable SPD designed to protect AC powerline ...

Model : DACN1-25VGS-30-760

DACN1-25VGS-30-760 Type 1+2+3 690VAC surge protector - 3 pole

DACN1-25VGS-30-760 The DACN1-25VG is an extreme duty Type 1+2+3 SPD designed to protect AC powerline at the main switchboard of an installation equipped with lightning rod, and in wind turbines' ...

Model : DS253E-690/WD

DS253E-690/WD Type 1+2 690VAC surge protector - 4 pole

Surge protector for wind generator networks

DS253E-690/WD The DS253E-690/WD AC surge protector is designed for 3-phase 690VAC and mainly use for wind generator networks. The MOV technology allows a very low level of protection and an absence of following ...

Model : DS252E-300/G

DS252E-300/G Type 1+2 AC surge protector single-phase

Extreme duty Type 1+2 SPD

The DS250E is an extreme duty Type 1+2 designed to protect the entrance of the electrical installation. They are used to protect biphase, 3-phase or 3-phase + neutral networks in ...

Model : DAC1-13VG-40-275

DAC1-13VG-40-275 Type 1+2+3 AC surge protector - 3-phase+N

The DAC1-13VG is an extreme duty Type 1+2+3 AC surge protector device designed to protect at the entrance of the electrical installation. This SPD is particularly useful in a high ...

Model : DS252VG-1000

DS252VG-1000 Type 1+2+3 AC surge protector - sing phase

DS252VG-1000 DS252VG-1000 is a 1-phase 2-wire (L+N) surge arrester set combined from two Citel DS250VG-1000 modules, in which each module will protect each different power wire (L or N). With ...