Reference price :
Contact us
  • Series
    M
  • Model
    M100-220Y
  • Brand / Made in
    CITEL / USA
  • Type 2 AC Power Surge Protective Device
  • System voltage: 220/380 Vac 
  • System: Wye 3Ph+N+G
  • Maximum Discharge Current per phase Imax (8/20μs): 100 kA 
  • All mode of protection
  • 200 kA short-circuit fault current rated
  • Multi-redundant protection circuit per phase
  • Full on-board diagnostics - LED indicators, remote and audible alarms
  • EMI/RFI noise filtering
  • NEMA 4 enclosure
  • Lightning counter (option)

M100 series: AC SURGE PROTECTORS AND FILTER HARD-WIRED UNITS AND COMBINER BOXES

Citel’s M100 Series is specification grade surge protection for service entrance or critical branch panels. The SPD is available for all your single and three phase applications up to 480Vac.
With 100.000 amps of surge handling capacity and EMI/RFI noise filtering, the M100 Series is a rugged yet refined SPD. Equipped with real-time LED fault indicators, remote contacts, audible alarm and abnormal N-G voltage detection this device provides much more power quality information than your typical TVSS.
For ease of application, the M100 Series is approved to the most stringent and widely recognized safety standards such as UL, cUL, IEC and CE

 

Electrical Characteristics

  • Model: M100-220Y
  • Type of network:220/380 Vac Wye 3Ph/N+G
  • Maximum Operating Voltage MCOV: 320 V (L-G / L-N)
  • Maximum discharge current Imax (8/200µs): 100 kA/phase
  • Response Time: < 5 ns
  • Protection modes: all modes: L/N - L/G - N/G - L/L
  • Voltage Protection Rating (VPR): 1500 V (L-N), 1200 V (L-G / N-G), 2000 V (L-L)
  • Joules (10/1000µs): 4690 J
  • UL short-circuit current rating: 200 kA
  • RFI filtering: - 40 dB
  • Standards compliance: UL1449 4th Edition Type 2

Safety

  • Thermal disconnector: Internal to each component
  • Electrical disconnector: Internal to each surge protector
  • Failure indicators: LED, audible alarm, and remote signaling 

Mechanical Characteristics

  • Housing material: Steel - NEMA 4/12 (Stainless Steel NEMA 4X)
  • Operating temperature: -40/+185 °F (-40/+85 °C)
  • Mounting: Wall mounting by screws (not supplied)
  • Connection to AC network: Hard-Wired #10 AWG, 24” Leads
  • Dimensions (H x L x D): 8 x 6 x 4 in (95 x 63.1 x 35 mm)

Specific features

  • Disconnection switch: No
closet

CART

No products in your cart
Báo Giá Sản Phẩm