Hotline:

Din-Rail Type 2+ AC Surge Protector

Secondary protection for branch electrical cabinets

Din-Rail Type 2 or Type 2+3 AC surge protector is installed in the branch electrical cabinet where without lightning rod (LPS), or are installed after Type 1 AC SPD equipped with lightning rod (LPS).

VG technology is based on the use of specific types of Gas-filled spark gaps (GSG) in conjuntions with Metal oxide varistors (MOV), have a behavior adapted to the power network and provide robustness and working stability very effectively with lightning impulses

Sort by

Products on the page:

Model : DAC80-31-275

DAC80-31-275 Type 2 AC surge protector - 3-phase+N

The new DAC80 range Is defined by its high Imax parameter of 80 kA. Classified in Type 2, the products of this range are intended to be installed inside the ...

Model : DAC80-40-275

DAC80-40-275 Type 2 AC surge protector - 3-phase+N

The new DAC80 range Is defined by its high Imax parameter of 80 kA. Classified in Type 2, the products of this range are intended to be installed inside the ...

Model : DAC80-20-275

DAC80-20-275 Type 2 AC surge protector single-phase

The new DAC80 range Is defined by its high Imax parameter of 80 kA. Classified in Type 2, the products of this range are intended to be installed inside the ...

Model : DAC50-40-275

DAC50-40-275 Type 2 AC surge protector - 3-phase+N

DAC50 series Type 2 AC surge protector The pluggable surge protectors Type 2 DAC50, are designed to protect AC powerline at the main switchboard of the installation. These SPDs are based ...

Model : DAC50VG-31-275

DAC50VG-31-275 Type 2+3 AC surge protector - 3-phase+N

DAC50VG series Type 2+3 AC surge protector The pluggable surge protectors Type 2+3 DAC50VG, are designed to protect AC powerline at the main switchboard of the installation. Equipped with the exclusive ...

Model : DAC50-20-275

DAC50-20-275 Type 2 AC surge protector single-phase

DAC50 series Type 2 AC surge protector The pluggable surge protectors Type 2 DAC50, are designed to protect AC powerline at the main switchboard of the installation. These SPDs are based ...

Model : DAC50VG-20-275

DAC50VG-20-275 Type 2+3 AC surge protector single-phase

Model : DS74R-400

DS74R-400 Type 2 AC surge protector - 3-phase+N

DS70R type 2 AC surge protector They are used mainly for primary protection of single and three-phase networks at the main electrical panel. They provide common-mode protection and are available ...

Model : DS44-400/G

DS44-400/G Type 2+3 AC surge protector - 3-phase+N

The DS40 surge protectors are designed to be used in a multipolar configuration to protect single-phase, 3-phase or 3-phase+neutral AC networks, are used mainly for primary protection at the main electrical ...

Model : DS44VG-230/G

DS44VG-230/G Type 2+3 AC surge protector - 3-phase+N

DS40VG series Type 2+3 AC surge protector DS40VG Type 2 +3 AC surge protector, using CITEL's 'VG technology', to completely eliminate the leakAge and operation current while providing maximum discharge capacity ...

Model : DS44VG-230

DS44VG-230 Type 2+3 AC surge protector - 3-phase+N

Model : DS440-280

DS440-280 Type 2 AC surge protector - 3-phase+N

DS440-280 - COMPACT 3-PHASE+N TYPE 2 SURGE PROTECTOR - 230/400 V - PLUGGABLE The DS440 Type 2 surge protectors are compact devices designed to protect 3-phase+N networks at the main ...