Reference price :
Contact us
  • Series
    DS50PV/51
  • Model
    DS50PV-1000G/51
  • Brand / Made in
    CITEL / FRANCE
  • Type 2 surge protector for Photovoltaic
  • PV voltage : 1000 Vdc
  • In : 15 kA
  • Imax : 40 kA
  • Pluggable module
  • Remote signaling (option)
  • EN 61643-31 / NF EN 50539-11 compliance
DS50PV/51 are Type 2 surge protectors are designed to protect against lightning surge voltages in photovoltaic power supply network. Based on the use of specific varistors, providing a protection in common mode or common and differential mode.

ELECTRICAL PROPERTIES

  • SPD type: 2
  • Network: PV network 1000 Vdc
  • Nominal PV voltage Uocstc: 1000 Vdc
  • Max. PV operating voltage Ucpv: 1200 Vdc
  • Residual Current Ipe: None
  • PV Permanent Operating current Icpv: < 0.1 mA
  • Follow current If: None
  • Nominal discharge current In: 15 kA
  • Max. discharge current Imax: 40 kA
  • Total Maximum discharge current Imax Total: 60 kA
  • Current withstand short circuit PV Iscpv: 15000 A
  • Connection mode(s): +/-/PE
  • Protection mode(s): Common/Differential mode
  • Protection level +/- Up: 4.6 kV
  • Protection level +/PE (-/PE) Up: 2.6 kV

MECHANICAL PROPERTIES

  • Technology: MOV+GDT
  • Connection to Network: By screw terminals: 2.5-25mm² 
  • Format: Plug-in modular box
  • Mounting: Symmetrical rail 35 mm (EN 60715)
  • Housing material: Thermoplastic UL94 V-0
  • Operating temperature: -40/+85°C
  • Protection rating: IP20
  • Outdoor application: No
  • Failsafe mode: Disconnection SPD of the PV line
  • Disconnection indicator: 2 mechanical indicators - Red/Green
  • Spare module(s): DSM50PV-1000G/51
  • Remote signaling of disconnection: Option DS50PVS-1000G/51 - output on changeover contact
  • Dimensions: See diagram

NORMS

  • Standards compliance: EN 61643-31 / EN 50539-11 
  • Certification: EAC

DECONNECTOR

  • Thermal disconnector: Internal
  • Fuses: without

Installation

DS50PV-1000G/51 surge protectors are connected in parallel on the DC network 

  • The total length of parallel connection wires to DC network must be lower than 0.5 m in order not to increase the protection level (Up) provided by the SPD.
  • Wiring is made by screw connections. On some models, a distribution bus can be used.
  • The protection wire coming from the SPD must be connected to the bonding bar of the electrical panel. Paralleling the protection wire with phases conductors must be avoided.
  • Local earthing resistance must be in compliance with the electrical rules.
closet

CART

No products in your cart
Báo Giá Sản Phẩm