Hotline:

Din-Rail Type 2+ AC Surge Protector

Secondary protection for branch electrical cabinets

Din-Rail Type 2 or Type 2+3 AC surge protector is installed in the branch electrical cabinet where without lightning rod (LPS), or are installed after Type 1 AC SPD equipped with lightning rod (LPS).

VG technology is based on the use of specific types of Gas-filled spark gaps (GSG) in conjuntions with Metal oxide varistors (MOV), have a behavior adapted to the power network and provide robustness and working stability very effectively with lightning impulses

Sort by

Products on the page:

Model : DS44-230

DS44-230 Type 2 AC surge protector - 3-phase+N

The DS40 surge protectors are designed to be used in a multipolar configuration to protect single-phase, 3-phase or 3-phase+neutral AC networks, are used mainly for primary protection at the main electrical ...

Model : DS42VG-230

DS42VG-230 Type 2+3 AC surge protector single-phase

DS40VG series Type 2+3 AC surge protector DS40VG Type 2 +3 AC surge protector, using CITEL's 'VG technology', to completely eliminate the leakAge and operation current while providing maximum discharge capacity ...

Model : DS42-280

DS42-280 Type 2 AC surge protector single-phase

Model : DS41-1000

DS41-1000 Type 2 1000VAC surge protector - 1 pole

DS41-1000 Type 2 1000VAC surge protector - 1 pole The DS41-1000 surge protectors is designed to be used in a multipolar configuration to protect single-phase, 3-phase or 3-phase+neutral 1000 VAC networks, are ...

Model : DAC80-31-275

DAC80-31-275 Type 2 AC surge protector - 3-phase+N

The new DAC80 range Is defined by its high Imax parameter of 80 kA. Classified in Type 2, the products of this range are intended to be installed inside the ...

Model : DAC40C-31-275

DAC40C-31-275 Compact 3-phase Type 2 surge protector - 40kA

DAC40C-31-275 The DAC40C Compact plugable surge protectors Type 2 (SPD) are intended to be connected at the TGBT or divisional panel level. Their compact format allows them to be installed in ...