Hotline:

Din-Rail Type 1+ AC Surge Protector

Electrical safety for general electrical cabinets

Din-Rail AC Din-Rail Surge Protector, primary protection with 10/350µs impulse caused by direct lightning currents. Type 1+2 SPD are heavy duty devices designed to be installed at the origin of the AC installation equipped with LPS, designed to protect 1, 2, 3 or 4 wires installed in 1 or 3 phase electrical distribution cabinets, customized to fit clients' needs, ease of installation & maintenance.

Sort by

Products on the page:

Model : DAC1-13-40-275

DAC1-13-40-275 Type 1+2 AC surge protector - 3-phase+N, 12.5kA / 50kA

DAC1-13-40-275 Type 1+2 AC surge protector - 3-phase+N, 12.5kA / 50kA DAC1-13 range are replacement product for DS13xR The DAC1-13 series are extreme duty Type 1+2 pluggable SPD designed to protect AC powerline ...

Model : DS250VG-690

DS250VG-690 Type 1+2+3 690VAC surge protector - 1 pole

Surge protector for wind generator networks

The DS250VG-690 AC surge protector is designed for 3-phase 690VAC and mainly use for wind generator networks. The `Spark gap + Varistor` technology allows a very low level of protection ...

Model : DS100EG-600

DS100EG-600 Type 1 N/PE AC surge protector - 1 pole

DS100EG-600 Type 1 N/PE AC surge protector - 1 pole This Type 1 Surge Protector is designed to be used in association with DS250E, DS150E & DS250VG surge protectors to provide ...

Model : DS252VG-1000

DS252VG-1000 Type 1+2+3 AC surge protector - sing phase

DS252VG-1000 DS252VG-1000 is a 1-phase 2-wire (L+N) surge arrester set combined from two Citel DS250VG-1000 modules, in which each module will protect each different power wire (L or N). With ...