Surge protection system for KIRIN INTERFOOD Factory

Category

Industry
Location

Biên hòa, Đồng Nai
CHỦ ĐẦU TƯ

INTERFOOD – KIRIN
NGÀY THỰC HIỆN

2023
SỐ LƯỢNG SẢN PHẨM

CITEL SPD
TRẠNG THÁI DỰ ÁN

The Project had finished

Description

KIRIN - INTERFOOD, the most modern manufacturer in Vietnam and one of today's most dominant and focused confectionery and beverage producers in Vietnam.

The factory is located in Dong Nai province where has been equipped with automation systems, very modern aseptic filling lines alongside with electronic equipment systems.

As electronic components become more sensitive to electromagnetic interference as well as the factory's location where there is the high density of lightning strikes thus the system is easily effected of the impact lightning strikes, or the operation of other high-speed electrical machines can cause of failure in electronics equipment.

Thy An Engineering Co., Ltd. - TAEC is honored to be their partner who provides a comprehensive lightning protection solution, using products from CITEL/France to protect the entire electrical system against electrical hazards and other potential dangers.

Electrical installation images

Go back

Location

Products Used

DS254E-300/G Type 1+2 AC surge protector - 3-phase+N

Model: DS254E-300/G

Type 1 + 2 unipolar surge protector
Iimp total: 100 kA on 10/350µs impulse
Imax : 140 kA on 8/20µs impulse
Internal disconnections, status indicators
Remote signaling
IEC 61643-11, EN 61643-11 and UL1449 ed.5 compliance

DAC1-13VG-31-275 Type 1+2+3 AC surge protector - 3-phase+N

Model: DAC1-13VG-31-275

Type 1 + 2 + 3 AC surge protector
VG Technology
Network: 230/400 V 3-phase+N
In : 20 kA
Iimp : 12.5 kA on 10/350µs impulse
No leakage current
Pluggable module for each phase
Remote signaling (option)
Optimized to TOV
EN 61643-11, IEC 61643-11 certified
UL1449 ed.5 compliance

DS134R-280/G Type 1+2 AC surge protector - 3-phase+N

Model: DS134R-280/G

Description: Type 1+2 AC surge protector - 230/400 V 3-phase+N
Standards compliance: IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Certification: EAC
Technology: MOV
Remote signaling of disconnection: option DS134RS-280/G : output on changeover contact
AC system: TT-TNS
Max. AC operating voltage : 280 Vac
Max. discharge current : 50 kA
Impulse current by pole : 12.5 kA
Admissible short-circuit current: 25 000 A

DAC1-13VG-20-275 Type 1+2+3 AC surge protector single-phase

Model: DAC1-13VG-20-275

Type 1 + 2 + 3 AC surge protector
VG Technology
Network: 230 V single-phase
In : 20 kA
Iimp : 12,5 kA on 10/350µs impulse
No leakage current
Pluggable module for each phase
Remote signaling (option)
Optimized to TOV
EN 61643-11, IEC 61643-11 certified
UL1449 ed.5 compliance

DAC50VG-31-275 Type 2+3 AC surge protector - 3-phase+N

Model: DAC50VG-31-275

Description: Type 2+3 AC surge protector - 3-phase+N
Standards compliance: IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Certification: KEMA / EAC
Technology: VG Technology (MOV+GSG)
SPD configuration: 3-phase+Neutral
Remote signaling of disconnection: option DAC50VGS-31-275: output on changeover contact
Network: 230/400 V 3-phase+N
AC system: TT-TNS
Max. AC operating voltage: 275 Vac
Residual Current: None
Max. discharge current: 50 kA
Total Maximum discharge current: 50 kA
Admissible short-circuit current: 50 000 A

DAC50-20-275 Type 2 AC surge protector single-phase

Model: DAC50-20-275

Description: Type 2 AC surge protector - Single-phase
Standards compliance: IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Certification: OVE / UL / EAC
Technology: MOV
SPD configuration: Single phase
Remote signaling of disconnection: option DAC50S-20-275: output on changeover contact
Network: 230 V single-phase
AC system: TN
Max. AC operating voltage : 275 Vac
Residual Current : < 1 mA
Max. discharge current : 50 kA
Total Maximum discharge current : 100 kA
Admissible short-circuit current: 50 000 A