Lightning rod is a common name used to refer to a system installed on the top of a building or on a high pole, consisting of one or more metal rods with pointed ends connected to ground conductors for protection. for structures, buildings and objects below from being struck by lightning.
The surge protection selection must be done following the local electrical code requirements (e.g. : minimum rating for In) and specific conditions (e.g. : high lightning density).
Surge surge protection devices (SPDs), also known as surge suppressors, are specific products in the electrical industry, the specifications of lightning protection devices on documents or products displayed Displays symbols and parameters to describe their own properties. Based on these parameters we can understand and compare the technical features of the devices, in order to use them most effectively.
Different electrical networks have different specifications and connections, so manufacturers have designed products for their respective protection installations. If selected incorrectly and installed improperly, not only will it lose its effectiveness, but it can also cause damage, fire, loss of electrical safety and affect the entire system.
What is the resistivity of the earth? The resistance of a cube earth is 1m3, to the current flowing from one side of the earth block to the opposite face. The unit of resistivity of soil is Ωm (ohm meter). It is possible to measure resistivity of soil according to the Wenner or Schlumberger method.
Sử dụng Type của thiết bị chống sét như thế nào ? Các thiết bị chống sét thuộc nhóm hay Type được các nhà sản xuất quy định trên mỗi sản phẩm, chúng phải đáp ứng theo các yêu cầu thử nghiệm của tiêu chuẩn IEC. Vậy khi nào thì sử dụng type 1, type 2 hay type 3, sử dụng như thế nào là phù hợp ?
Sét là một hiện tượng khí tượng phức tạp. Nắm rõ được bản chất quá trình hình thành và tác động của sét đến các công trình xây dựng, ví dụ như các tòa nhà, kho tàng, bến bãi, các cột, tháp vô tuyến, phát thanh truyền hình, các đường dây điện lực, đường dây viễn thông, đường dây điện thoại, internet, cáp đồng trục anten phi đơ từ đó ta có các biện pháp phòng chống sét một cách có hiệu quả. Vậy sét là gì ?
Hệ thống phân phối điện hạ áp thường sử dụng loại 3 pha 3 dây hoặc 3 pha 4 dây để truyền tải, cấp nguồn cho các thiết bị điện hoạt động, vậy chúng vận hành và có sự khác nhau như thế nào ? Ủy ban Kỹ thuật điện quốc tế (IEC) đã đưa ra các quy định tiêu chuẩn hóa về cách gọi các loại mạng điện khác nhau như TT, IT, TN, TN-C, TN-S ...
Công suất và công suất phản kháng trong điện năng là khái niệm để mô tả và đo lường phần năng lượng điện đã được truyền qua một mạch điện trong một đơn vị thời gian nhất định. Trong hệ đo lường quốc tế, đơn vị đo công suất là Oat được ký hiệu là W (1W = 1J/s), viết tắt tên của James Watt.