Tiếng Việt|English
Hotline: +84 902 858 897
ThyAn Company, provider Test & Measurement Devices
Home > Measurement Tools > Other Test & Measurement Tools > Lightning and Surger Protector Testers

Lightning and Surger Protector Testers

Nhóm sản phẩm gồm các thiết bị và dụng cụ chuyên đo kiểm về chống sét : Thiết bị đo đếm dòng sét đánh trực tiếp, Thiết bị kiểm tra tình trạng hoạt động của các đầu kim thu sét, Thiết bị kiểm tra các phần tử chống sét lan truyền, kiểm tra các bộ, tủ, modul chống sét cho đường nguồn điện, cho đường truyền tín hiệu, đường truyền dữ liệu. Các sản phẩm nhãn hiệu CITEL-Pháp, AT3W-Spain, Chauvin Arnoux-France

SPT-203 Smart SPD Tester

Model: SPT-203 - Origin: CITEL / France
SPT-203 Smart SPD Tester: Testing the MOV, GDT and TVS components or AC or data surge protective devices (SPD), 7-inch TFT display with touch-screen. Detail

SPT1003 Surge Protector Tester

Model: SPT1003 - Origin: CITEL / France
SPT1003 tester: This unit is designed to control all kinds of surge protective components (GDT, MOV, clamping diodes) or AC or data surge protective devices (SPD). It can test 2-pole (MOV, Diode, GDT), 3-pole (GDT) or 2-port (2 wires in, 2 wires out, earthing point = SPD). Extra feature of line continuity control (2-port SPD). Digital display.. Detail

ESE DAT Tester

Model: DAT Tester - Origin: AT3W / Spain
DAT Tester is an electronic system based on a microcontroller, able to verify the working of all Aplicaciones Tecnológicas, S.A. Lightning Air Terminals. DAT Tester indicates their proper working and diagnoses their failure if it occurs. DAT Tester performs the test applying a voltage over 5000 volts to the air terminal. Therefore, it is very important not to manipulate the device while the security key is in H.V.ON position.. Detail

ATLOGGER Lightning Strike Counter & Recorder

Model: AT-004G - Origin: AT3W / Spain
The ATLOGGER (AT-004G) is a recorder of electrical activity in the down-conductor of the lightning rod that allows, in addition to a count of the number of impacts, record the amplitude and polarity of the lightning, and the date and time when the impact occurred. Detection Range  2kA(8/20) to 100kA(10/350), Accuracy 1kA, Response time 1 second. Detail

AT-034G Lightning Event Counter

Model: AT-034G - Origin: AT3W / Spain
The AT-034G lightning event counter is a device to be installed on the down-conductor, usually above the guard tube. It automatically counts the strikes received by the lightning protection system. It is very sturdy and totally autonomous, however it is advisable to check it periodically in order to see if there has been a strike and, therefore, whether or not the lightning protection system needs any special maintenance.. Detail

LSC-A Lightning Current Counter

Model: LSC-A - Origin: CITEL / France
CITEL LSC-A, This device counts each impulse current greater than 0.5 kA. It is designed for outdoor or indoor application and is mounted directly on the down conductor with the supplied flange. This lightning counter is also available with solar supply (outdoor application). Detail

LSC-6D Lightning Strike Counter

Model: LSC-6D - Origin: Alltec / US
The LSC-6D requires a 0.5 μH inductance shunt (approximately 8.0 ft conductor length) to count nature’s smallest lightning strike (3 kA). This inductance can be in the form of a wire length, tower, or pipe segment. To calculate, use the following approximations:. Detail
Including 9 product(s) in this category
Your Cart
Measurement Tools
The Essentials 2017